Ross SYNERGY 4000DR-003, Operation Manual, Page: 98 / 332

4–20 • Switcher Basics Synergy Series Operation Guide (v18)
Personality Menu 4-4
2. Toggle the
Qck Trans PV
button between
On
and
Off
as follows:
•
On
— Use this option to enable a Transition Preview on the Program MLE.
• Off — Use this option to not preview the next transition on the Program MLE. This
is the default setting.
This concludes the procedure to enable the Quick Transition Preview option.
Bus Hold Clear
The Bus Hold Clear function allows you to clear the Bus Holds during an ALL + ALL reset.
Use the following procedure to enable the Bus Hold Clear function:
1. Navigate to the Personality Menu 4-4 as follows:
• Press HOME B MORE B Setup B Personality B MORE B MORE
B MORE .
Personality Menu 4-4
2. Toggle the BusHoldClear button between On and Off as follows:
• On — Use this option to enable the Bus Hold Clear function. All Bus Holds are
turned off when an ALL + ALL reset is performed. This is the default setting.
• Off — Use this option to disable the Bus Hold Clear function. All Bus Holds are
left on when an ALL + ALL reset is performed.
This concludes the procedure to enable the Bus Hold Clear function.