Ross SYNERGY 4000DR-003, Operation Manual, Page: 241 / 332

Synergy Series Operation Guide (v18) Keying • 7–67
C) When the circular Positioner Icon is displayed, you can use the bottom knob to
adjust the function, or you can twist the Positioner ’s knob clockwise and
counter-clockwise .
3. Positioner Function Section 1
• Enable
MENU
to assign Positioner control to menu functions, temporarily
disabling control over positionable functions. When the button is turned off,
Positioner control (for a selected MLE and function) is restored. Note that when
you select a menu that includes the three Positioner Icons , the
MENU
button
automatically lights. Refer to the section “ Positioner Group ” on page 7–64 for
additional details on the three Positioner Icons .
• Press
CENTER
to return the wipe, flying key or border to its default position,
typically removing all X, Y, and Z-axis offsets from the image.
4. Positioner Function Section 2
• Press
PATT
to switch Positioner control over to the selected MLE’s pattern
generator. Note that there is only one
PATT
button in the group, yet there are two
pattern generators per MLE. To determine which pattern generator is controlled,
check the
Pattern Control group:
~ If
WIPE PP1
is lit, pattern generator 1 is controlled.
~ If
PST PATT2
is lit, pattern generator 2 is controlled.
• Press
FLY KEY 1
to switch Positioner control over to the selected MLE’s Key 1
group or DSK 1 group. The Squeeze & Tease Menu automatically is displayed. If
FLY KEY
is enabled and the Positioner is on (and the Squeeze & Tease option is
installed), the key can be sized and positioned.
• Press
FLY KEY 2
to switch Positioner control over to the selected MLE’s Key 2
group or DSK 2 group. The Squeeze & Tease Menu automatically is displayed. If
FLY KEY
is enabled and the Positioner is on (and the Squeeze & Tease option is
installed), the key can be sized and positioned.
• Press
BORD 1
to switch Positioner control over to the selected MLE’s first custom
border generator (for Key 1 or DSK 1 ). The Dual Border Generator option must
be installed.
• Press
BORD 2
to switch Positioner control over to the selected MLE’s second
custom border generator (for Key 2 or DSK 2 ). The Dual Border Generator
option must be installed.
• Press
DVE
to toggle between the 3D menu currently selected and the previously
selected 3D menu.
Note To move two flying keys at the same time, press FLY KEY 1 and FLY
KEY 2 simultaneously.
Note To move two borders at the same time, press BORD 1 and BORD 2
simultaneously.
MENU
CENTER
PATT
FLY
KEY1
FLY
KEY2
BORD1
BORD2
DVE