Ross SYNERGY 4000DR-003, Operation Manual, Page: 255 / 332

Synergy Series Operation Guide (v18) Memory Functions and More • 8–13
• Synergy 3 and 4 only — To recall two MLEs, press the desired MLE buttons
together, for example,
MLE 2 + MLE 3
.
• Synergy 4 only — To recall three MLEs, press the desired MLE buttons together,
for example,
MLE 1 + MLE 3 + MLE 4
.
2. ( Optional ) Using the buttons in the Include and Recall sections, select the type of data
that you want to include in the recall operation. These buttons arm the function for each
data category. They can be enabled in any combination.
• When lit,
ATTRIB
indicates that the Auto Recall option in the Personality menu is
enabled, and the switcher will recall the
KEY ONLY , INCL DVE
, and
EFF DISS
settings as part of a memory recall operation.
• Enable
INCL DVE
to recall the DVE effect number (if any) that was stored in the
selected memory register. If you also want to recall the DVE’s associated Aux Bus
crosspoints, ensure that a primary DVE is interfaced with the switcher.
• Enable
KEYS ONLY
to recall all memory register information except for
PGM/PST (or BKGD/PST) bus crosspoints.
~
For Synergy 2, the “ Keys Only ” function in the Global Memory System
group works with the lit MLE button(s) in the Recall Section .
~ For Synergy 3 and 4, the “ Keys Only ” function in the Global Memory System
group applies only to the PGM/PST MLE.
• Enable
VTR CLIP
to recall VTR, Video Server or Audio Server clip data from a
selected memory register. Registers include a physical serial controlled device (such
as a VTR, Video Server or Audio Server) and a timecode. If the device is a server,
additional information such as an ID is also stored.
The
VTR Remote Control , Video Server Control or Audio Server Control
option must be installed. Any combination of options can be installed.
• Enable
EFF DISS
to recall all non-dissolving values first, and then slew any stored
analog functions from their current settings to the recalled settings.
~
Synergy 2 — The “ Effects Dissolve ” function in the Global Memory System
group works with the lit MLE button(s) in the Recall Section .
~ Synergy 3 and 4 — The “ Effects Dissolve ” function in the Global Memory
System group applies only to the PGM/PST MLE.
3. On the keypad, enter the desired register to recall:
• If required, select the bank. Two methods are available:
~ Press
BANK
repeatedly, to advance by one bank per press .
Note KEY ONLY , INCL DVE , and EFF DISS settings are only recalled if
the Auto Recall option is enabled. See “ Auto Recall ” in the Switcher
Personality section of this chapter.
Important If you have selected more than one MLE and the INCL DVE button is
on, select a button in the DVE Send group to determine which specific
MLE is assigned DVE control for the recalled effect.
Note If the desired bank is already selected, you need only select the register
(from 0 to 9 ) to immediately recall the setup.