Ross SYNERGY 4000DR-003, Operation Manual, Page: 96 / 332

4–18 • Switcher Basics Synergy Series Operation Guide (v18)
Color Selection Menu.
5. Adjust the appearance of the White Flash as follows:
• Use the
Luminance
knob to adjust the luminance level of the White Flash.
• Use the
Saturation
knob to adjust the saturation level of the White Flash.
• Use the
Hue
knob to adjust the hue levels of the White Flash.
This concludes the procedure to configure the White Flash feature.
Recall Deleted Memories
The Recall Deleted Memories feature enables you to configure the switcher to recall memories that
have been marked as deleted in the Memories Setup Menu . If you do not enable this feature, a popup
message will display every time you attempt to recall a deleted memory, and the memory will not be
recalled.
Use the following procedure to configure the Recall Deleted Memories feature:
1. Navigate to the Personality Menu 3-4 as follows:
• Press HOME B MORE B Setup B Personality B MORE B MORE .
Personality Menu 3-4
2. Toggle RclDelMems between Yes and No as follows:
• Yes — Use this option to recall memories even if they have been tagged as deleted
in the Memories Setup Menu .
Note The White Flash default is set to HSL . Press RGB if you wish to edit
the White Flash in RGB colors.
Operating
Tip
You can turn the White Flash effect off by repeating steps 1 and 2 and
toggling the
White Flash softkey to Off .