manualshive.com logo in svg

Ross SYNERGY 4000DR-003, Operation Manual, Page: 73 / 332

Share
Download
Ross SYNERGY 4000DR-003 Operation Manual Download Page 73

Synergy Series Operation Guide (v18)

Using the Menu System • 3–9

Pop-up Help

The 

Pop-up Help 

feature is designed to alert the operator when an illegal function is attempted. When 

an illegal action is performed, a 

Pop-up Help

 window is displayed. This window will provides a brief 

explanation of why the operation cannot be performed and a reference number that can be used when 
contacting Ross Technical support. 

The following is an example of a Pop-up window.

Pop-up Help Menu

Note

The 

Pop-up

 window will 

only

 display while the related button is 

pressed. If a button related function is not operating properly, hold 
down the button to see if there is a related Pop-up window.

Summary of Contents for SYNERGY 4000DR-003













































































































































































































































































































































Reviews:

No comments