Ross SYNERGY 4000DR-003, Operation Manual, Page: 298 / 332

9–18 • Custom Controls Synergy Series Operation Guide (v18)
control panel. Remember that buttons marked with an asterisk (*) in the list have
already been programmed.
3. Press
Start Recording
to display the Recording Menu .
Custom Controls — Recording Menu
4. Add all the events to your custom control that you wish to repeat.
5. Press a free
Custom Control
button corresponding to the loop-back custom control.
Calling another Custom Control must be the final step in a custom control so the
recording is automatically ended.
Now, you must define the loop-back custom control to complete the loop.
6. Select the custom control button you defined as the loop-back custom control in step 5
as follows:
• Use the Bank knob to select the custom control bank you want to record the
loop-back custom control to.
• Use the
Button
knob to select the custom control button that you want to record the
loop-back custom control macro to. You can also press the desired button directly
on the control panel. Remember that buttons marked with an asterisk (*) or an “at
symbol” (@) in the list have already been programmed.
7. Press
Start Recording
to display the Recording Menu .
Custom Controls — Recording Menu
8. Press the Custom Control button corresponding to the original custom control that
you just created.
9. Calling another Custom Control or inserting a Go To Menu command must be the final
step in a Custom Control so the recording is automatically ended.
This completes the procedure for creating a looping custom control.
Operating
Tip
As a recommendation, keep special functions grouped together on
your
physical custom control buttons.