Ross SYNERGY 4000DR-003, Operation Manual, Page: 164 / 332

6–14 • Pattern Control Synergy Series Operation Guide (v18)
Squeeze & Tease 2D Wipes
The Squeeze & Tease 2D Wipe function allows you to perform push-offs, pull-ons and other similar
DVE transitions from within an MLE itself.
Use the following method to activate the Squeeze & Tease 2D wipes function:
1. Press
DVE SEND
and
WIPE
at the same time in the selected MLE’s Transition
Group .
Both buttons illuminate, if a free Squeeze & Tease channel is available in that MLE. In
the Pattern Control section, the
S&T WIPES
button lights, the selected MLE’s button
lights, and the array of 40 wipe buttons becomes a Squeeze & Tease “shot box” —
allowing you a choice of 40 different transitions. The
S&T WIPES
button alerts you
that the section is now in Squeeze & Tease “shot box” mode.
The following figure illustrates the available “Squeeze & Tease” wipes. The numbers under the wipe
patterns indicate the position of the key in the Pattern Control group.
Squeeze & Tease 2D Wipes — Visual Representations.
To view the Squeeze & Tease 2D wipes in the panel menu, press any of the 40 wipe buttons, or
navigate using the menu system as follows:
• Press
HOME B Help B List S&T Wipes
.
The image below lists Squeeze & Tease 2D wipe names for the pictures above, as they appear in the
panel menu when any wipe button is pressed.
Note The graphical representations of the wipes do not correspond with the
patterns on the actual keys in the Pattern Control group.
00 01 02 03 04 05 06 07 08 09
10 11 12 13 14 15 16 17 18 19
24 25 26 28 29
30 31 32
20 21
22 23
34 35 36 37 38 39 33
27