Ross SYNERGY 4000DR-003, Operation Manual, Page: 89 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–11
Global-Level Memory Auto Recall
With the Auto Recall
On
:
• Memory recalls retrieve the MLE-level saved settings for
KEYS ONLY
,
EFF DISS
,
and the wipe button associated with a
DVE SEND
.
• The
KEYS ONLY
and
EFF DISS
buttons on the Global Memory System will reflect
only stored settings saved from the PGM/PST MLE (program MLE).
• When selected, the
INCL DVE
button recalls the wipe button associated with a
DVE
SEND
saved on any one MLE.
• With Auto Recall
Off
, you set
KEYS ONLY
,
EFF DISS
, and
INCL DVE
button
settings manually before you recall the memory.
3D Pattern Button Assign Option
To use this function, you require the S&T 3D/WARP option installed in an MLE (or MLEs) of your
switcher. For information about obtaining the S&T 3D/WARP option, contact Ross Video Technical
Support. If you have the S&T 3D option installed, refer to your
Squeeze & Tease 3D/WARP Owner’s
Guide for details on installing sequences and wipes to your switcher.
Use the following procedure to configure the 3D Pattern Button Assign option:
1. Navigate to the Personality Menu 2-4 as follows:
• Press
HOME B MORE B Setup B Personality B MORE
.
2. Press
3D Pattern Button Assign
to display the S&T Wipe/Sequence Assignment
Menu .
S&T Wipe/Sequence Assignment Menu
3. Assign a sequence to a Pattern Control button as follows:
• Use the Button knob to select a Pattern Control button. By default the middle
Sequence selections track the button selections.
• Use the Sequence knob to select a sequence to assign to the chosen button. You
may assign the same sequence to several buttons if you wish. In the Main Area , the
parameters of the selected sequence are displayed.
This concludes the procedure to configure the 3D Pattern Button Assign option.
Note
The Auto Recall is set to Off by default.
Operating
Tip
Press UP ONE to return to the previous menu.