Ross SYNERGY 4000DR-003, Operation Manual, Page: 217 / 332

Synergy Series Operation Guide (v18) Keying • 7–43
DSK Setup Menu
3. Select which Downstream Keyer to display as follows:
• Toggle the
Show
softkey to select which DSK you wish to display.
~ DSK1 — Select this option to display Downstream Keyer 1.
~ DSK2 — Select this option to display Downstream Keyer 2.
4. Assign the current state of the DSKs as the default state as follows:
• Press Grab Both DSKs to save the current DSK Source Bus setup as the default
settings. If the switcher is reset, these settings will be retained.
This completes the procedure to store a DSK crosspoint assignment.
Locking/Unlocking a DSK Source Button Setup
You can lock the current settings for any of the DSK Source buttons so that they can be selected, but
not altered unless unlocked. This allows you to ensure that certain DSK Sources will remain
unchanged, or will not be changed by accident.
If you attempt to alter a DSK Source that has been locked, the following pop-up will be displayed.
DSK Lock Pop-up
Use the following procedure to lock or unlock a DSK Source button:
1. Navigate to the DSK Setup Menu as follows:
• Press HOME B MORE B Setup B Installation B DSK .