Ross SYNERGY 4000DR-003, Operation Manual, Page: 99 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–21
Audio Cut Only
The Audio Cut Only features sets whether audio transitions occur at the same rate as the video
transition, or whether the audio transitions cut. Note that this is not a true cut as the speed that one
channel is taken off-air and the next channel is take on-air depends on the Audio Mixer.
Use the following procedure to set up the Audio Cut Only feature:
1. Navigate to the Personality Menus as follows:
• Press
HOME B MORE B Setup B Personality B MORE B MORE
.
2. Use the
Option
knob on the Personality Menu to select
AudioCutOnly
.
Audio Cut Only — Personality Menu
3. Use the Value knob on the Personality Menu to toggle this feature On or Off .
• On — Select this option to have audio transition cut, regardless of the type or rate
of the video transition.
•
Off
— Select this option to have audio transition at the same rate as the video
transition.
This completes the procedure for setting up the Audio Cut Only feature.
Note When the OverDrive Editor is active (the EDITOR button in the
Global Memory System Group is lit), and OverDrive is controlling
the switcher, the audio transition rate for the PGM MLE is set from
OverDrive.