Ross SYNERGY 4000DR-003, Operation Manual, Page: 261 / 332

Synergy Series Operation Guide (v18) Memory Functions and More • 8–19
Naming Memory Registers
The Name Memories Menu allows you to name (or rename) any of the 100 available memory
registers (on an individual MLE basis). This means that Register 10 (on MLE 1) can have a different
name than Register 10 (on MLE 2).
Use the following procedure to name a memory register:
1. Navigate to the Name Memories Menu as follows:
• Press HOME B Attributes B Memories Setup .
Name Memories Menu
2. Select the memory Register you want to name as follows:
• Use the top knob to select the MLE that you want to name a memory register.
• Use the Bank knob to select the register that you wish to change.
3. Press Modify to display the Change Memory Name Menu .
Change Memory Name Menu
4. Enter (or edit) the desired register name as follows:
• Use the Memory knob to select the desired register ( 0 through 99 ). As you scroll
through the registers, the Current Name field tracks each name.
• Use the Horizontal knob to move the highlight horizontally.
• Use the Vertical knob to move the highlight vertically.
• Use the Space , Prev Letter , Next Letter and Default softkeys to edit the name
as required.
• A Standard PS/2 keyboard can also be used to perform the same actions as pressing
or rotating the
System Control buttons and knobs. Refer to the section “ Using a
Keyboard ” on page 2–16 for details.