Ross SYNERGY 4000DR-003, Operation Manual, Page: 303 / 332

Synergy Series Operation Guide (v18) Custom Controls • 9–23
7. Press
Insert
to save your changes.
8. Press
UP ONE
to display the Inserting Menu .
Custom Controls — Recording Menu
9. Press
Finish Inserting
to finish inserting to the selected custom control.
This completes the procedure for modifying a custom control event.
Inserting Events
The Insert Events function allows you to insert a number of events into an already existing custom
control. Events are inserted immediately before the event that is currently highlighted.
Use the following procedure to insert an event into a custom control:
1. Navigate to the Custom Controls Menu as follows:
• Press HOME B Custom Controls .
Custom Controls Menu
2. Select the Custom Control bank and button that you want to edit to as follows:
• Use the Bank knob to select the custom control bank that you want to edit the
custom control on.
• Use the Button knob to select the custom control that you wish to edit.
3. Press Edit to display the Edit Custom Control Menu .
Operating
Tip
Press Cancel Inserting to return to the previous menu without
recording any of the insertions you made.
Note
Only buttons with an asterisk (*) or an “at symbol” (
@
) next to them in
the list are already programmed and can be edited.