Ricoh LP124w, Software Manual

Page: 58 / 376

Preparing for Printing
44
1
When using the PostScript 3 Printer Driver
Follow the procedure below to set up the PostScript 3 printer driver.
Important
❒
In an IPv6 environment, NetWare servers cannot be used.
A
In the [ Printers ] or [ Printers and Faxes ] window, open the printer properties.
B
Click the [ PostScript ] tab.
If you are using Windows 2000/XP or Windows NT4.0, click the
[ Device Set-
tings ] tab, and then clear the check boxes.
C
Click [ Advanced ] .
D
Clear the [ Send CTRL+D before job ] and [ Send CTRL+D after job ] check boxes, and
then click [ OK ] .
E
Click [ OK ] to close the printer properties dialog box.
Form Feed
Do not use NetWare to configure form feed. Form feed is controlled by the print-
er driver on Windows. If NetWare form feed is configured, the printer may not
print properly.
Follow the procedure below to disable form feed according to the operating sys-
tem used:
• Under Windows 95/98/Me, clear the
[ Form feed ] check box on the [ Printer Set-
tings ] tab in the printer properties dialog box.
• Under Windows 2000/XP, Windows Server 2003/2003 R2, or Windows NT
4.0, clear the [ Form feed ] check box on the [ NetWare Settings ] tab in the printer
properties dialog box.
Banner Page
Do not use NetWare to configure a banner page.
Follow the procedure below to disable banner pages according to the operating
system used:
• Under Windows 95/98/Me, clear the
[ Enable banner ] check box on the [ Printer
Settings ] tab in the printer properties dialog box.
• Under Windows 2000/XP, Windows Server 2003/2003 R2, or Windows NT
4.0, clear the [ Enable banner ] check box on the [ NetWare Settings ] tab in the print-
er properties dialog box.