Ricoh LP124w, Software Manual

Page: 41 / 376

Using the Standard TCP/IP Port
27
1
L
Click [ Next > ] in the [ Add Standard TCP/IP Printer Port Wizard ] dialog box.
M
Enter the printer name or IPv4 address in the [ Printer Name or IP Address ] box.
The [ Port Name ] text box automatically obtains a port name. Change this name
if necessary.
When screen for Device selection appears, select “RICOH NetworkPrinter
Driver C Model”.
N
Click [ Next > ] .
O
Click [ Finish ] in the [ Add Standard TCP/IP Printer Port Wizard ] dialog box.
The installation start dialog box reappears.
P
Check that the port of the selected printer is displayed in [ Port: ] .
Q
Configure the default printer as necessary.
R
Click [ Continue ] .
The printer driver installation starts.
S
After the installation is completed, select one of the options to restart the
computer either now or later, and then click
[ Finish ] .
Restart the computer to complete installation.
Note
❒
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒
To stop installation of the selected software, click [ Cancel ] before installa-
tion is complete.
❒
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use
[ Add Printer ] .
Reference
p.50 “Having Problems Installing the Printer Driver from the CD-ROM”