Ricoh LP124w, Software Manual

Page: 27 / 376

Using the SmartDeviceMonitor Port
13
1
P
Select the printer you want to use, and then click [ OK ] .
Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click
[ Specify Address ] , and then enter the IPv4 ad-
dress or host name of the printer.
You cannot add an IPv4 address partially similar to the one already used. For
example, if “192.168.0.2” is in use, “192.168.0.2xx” cannot be used. Similarly,
if “192.168.0.20” is in use, “192.168.0.2” cannot be used.
Q
Click [ OK ] .
R
Check that the selected port is highlighted in [ Print to the following port: ] , and
then click [ OK ] .
S
Restart the computer to complete installation.
Note
❒
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒
A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.