Ricoh LP124w, Software Manual

Page: 170 / 376

Printing GL/2 and TIFF Files
156
5
Using From HDI Driver
Reference
p.165 “Using the HDI Driver for AutoCAD”
Using From the Printing Commands
The following explains printing operations using the “lpr”, “rcp”, and “ftp”
commands.
Note
❒
Match the data format of the file to be printed with the emulation mode of the
printer.
❒
If the message “print requests full” appears, no print jobs can be accepted. Try
again when sessions end. For each command, the amount of possible sessions
is indicated as follows:
• lpr: 5 (When the spool printing function is available: 10)
• rcp, rsh: 5
• ftp: 3
❒
Enter the file name in a format including the path from the directory execut-
ing commands.
lpr
❖
When specifying a printer by IP address
c:> lpr -Sprinter's IP address [-ol] \pass name\file name
❖
When using a host name instead of an IP address
c:> lpr -Sprinter's host name [-ol] \pass name\file name
When printing a binary file, add the “-ol” option (lowercase O, and lowercase L).
When using a printer with the host name “host” to print a PostScript file named
“file 1” located in the “C:PRINT” directory, the command line is as follows:
c:> lpr -Shost -Pfiletype=RPS -ol C:\PRINT\file1