Ricoh LP124w, Software Manual

Page: 365 / 376

When Using Windows Terminal Service/MetaFrame
351
11
Limitations
The following limitations apply to the Windows Terminal Service environment.
These limitations are built in Windows Terminal Service or MetaFrame.
❖
Windows Terminal Service
In an environment where Windows Terminal Service is installed, some print-
er driver functions are unavailable, even if no Windows Terminal Service
functions are used. Use the install mode to install SmartDeviceMonitor for
Client in an environment where Terminal Service is running on a Windows
NT Server 4.0 Terminal Server Edition or Windows 2000 Server family com-
puter. The following are the two methods of installation using the install
mode:
A Use [ Add/Remove Programs ] in [ Control Panel ] to install SmartDeviceMonitor
for Client.
B Enter the following command in the MS-DOS command prompt:
CHANGE USER /INSTALL
To quit the install mode, enter the following command in the MS-DOS com-
mand prompt:
CHANGE USER /EXECUTE
Note
❒
For more information, see Windows Help.
❖
MetaFrame’s [ Auto-creating client printers ]
Using [ Auto-creating client printers ] , you can select a logical printer created by
copying the client’s local printer data to the MetaFrame server. We strongly
recommend testing this function in your network environment before using
it for your work.
• The settings for optional equipment will not be stored in the server after
the equipment is disconnected. The settings for optional equipment will be
restored to its defaults each time the client computer logs on to the server.
• When printing a large number of bitmap images or using the server in a
WAN environment over dial-up lines such as ISDN, printing may not be
possible or errors may occur, depending on data transfer rates.
• When using MetaFrame XP 1.0 or higher versions, we recommend making
settings in
[ Client Printer bandwidth ]
under
[ Citrix Management Console ]
accord-
ing to the environment.