Ricoh LP124w, Software Manual

Page: 309 / 376

Printing Files Directly from Windows
295
8
rcp
First, register the printer's host name in the hosts file.
c:> rcp
[ -b ]
\pass name\file name
[ pass name\file name... ]
printer's
host name:
[ option ]
Note
❒
In file names, “*” and “?” can be used as wild cards.
❒
When printing a binary file, add the “-b” option.
When using a printer with the host name “host” to print a PostScript file named
“file 1” or “file 2” located in the “C:\PRINT” directory, the command line is as
follows:
c:> rcp -b C:\PRINT\file1 C:\PRINT\file2 host:filetype=RPS
ftp
Use the “put” or “mput” command according to the number of files to be printed.
❖
When one file is printed
ftp> put \pass name\file name
[ option ]
❖
When multiple files are printed
ftp> mput \pass name\file name
[ \pass name\file name... ] [ option ]
A
Formulate the printer’s IP address or the host name of the hosts file printer
as an argument and use the “ftp” command.
% ftp printer’s IP address
B
Enter the user name and password, and then press the
{
OK
}
key.
For details about the user name and password, consult your administrator.
User:
Password:
C
When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.
D
Specify files to be printed.
The following shows the examples of printing a PostScript file named “file 1”
in the “C:\PRINT” directory and printing file 1 and file 2.
ftp> put C:\PRINT\file1 filetype=RPS
ftp> mput C:\PRINT\file1 C:\PRINT\file2