Ricoh LP124w, Software Manual

Page: 265 / 376

Remote Maintenance by telnet
251
6
Note
❒
You can use this command only when the IEEE 802.11b interface unit is in-
stalled.
eap
{tls|ttls|leap|peap
} {chap|msc-
hap|mschapv2|pap|md
5|tls}
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are settings for
the phase 2 method, and must be set when using EAP-
TTLS or PEAP.
Do not make these settings when using other EAP au-
thentication types.
If you select EAP-TTLS, you can select chap, mschap,
mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or tls.
username "charac-
ter string"
You can specify the login user name for the Radius server.
Usable characters: ASCII 0x20-0x7e(31 bytes) other than
“@”. The default is blank.
username2 "charac-
ter string"
You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31 bytes) other than
“@”. The default is blank.
domain "character
string"
You can specify the login domain name for the Radius
server.
Usable characters: ASCII0x20-0x7e (31 bytes) other than
“@”. The default is blank.
password "charac-
ter string"
You can specify the login password for the Radius server.
Usable characters: ASCII 0x20-0x7e(128 bytes). The de-
fault is blank.
srvcert {on | off}
You can set the server certificate. The default is “off”.
imca {on | off}
You can enable or disable the certificate when the inter-
mediate certificate authority is present. The default is
“off”.
srvid "character
string"
You can set the server ID and subdomain of the certificate
server.
Parameter Value configured