Ricoh LP124w Software Manual Download

Page: 203 / 376

Using Web Image Monitor

189

About Menu and Mode

There are two modes available with Web Image Monitor: guest mode and ad-
ministrator mode.
Displayed items may differ depending on the printers.

❖

About Guest Mode

In the guest mode, printer status, settings, and print job status can be viewed,
but the printer settings cannot be changed.

Home

The

[

Status

]

[

Device Info

]

, and

[

Counter

]

tab are displayed. Details of the tab
menu are displayed on the work area.

Printer: Print Jobs

Allows you to display list of Sample
Print, Locked Print, Hold Print, and
Stored Print jobs.

Job

Display all print files.

Configuration

Display current printer and network
settings.

BAL203S

Summary of Contents for LP124w
























































































































































































































































































































































































Search results

Summary of Contents for LP124w

Reviews:

Related manuals for LP124w

Brands by name

Popular brands

Ricoh LP124w, Software Manual

Search results

Summary of Contents for LP124w

Reviews:

Related manuals for LP124w

Brands by name

Popular brands