Ricoh LP124w Page 24 Software Manual Download | Manualshive

Page: 24 / 376

background image

Preparing for Printing

10

1

Installing the RPCS Printer Driver (IPP)

Important

❒

To install printer driver under Windows 2000/XP and Windows Server
2003/2003 R2, you must have an account that has Manage Printers permis-
sion. Log on as an Administrators or Power Users group member.

A

Quit all applications currently running.

B

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

C

Select an interface language, and then click

[

OK

]

.

The default interface language is English.

D

Click

[

RPCS Printer Driver

]

.

E

The software license agreement appears in the

[

License Agreement

]

dialog

box.

After reading the agreement, click

[

I accept the agreement.

]

, and then click

[

Next >

]

.

F

Select a printer driver you want to use in the

[

Select Program

]

dialog box.

You can select several printer drivers.

G

Select the printer model you want to use.

The printer name can be changed in the

[

Change settings for 'Printer Name'

]

box.

H

Double-click the printer name to display the printer settings.

The details shown in

[

Comment:

]

,

[

Driver:

]

, and

[

Port:

]

vary depending on the

operating system, printer model, and port.

I

Click

[

Port:

]

, and then click

[

Add

]

.

J

Click

[

SmartDeviceMonitor

]

, and then click

[

OK

]

.

K

Click

[

IPP

]

.

L

In the

[

Printer URL

]

box, enter “http://printer’s address/printer” as the printer's

address.

If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter “https://printer’s address/printer” (Internet Explorer
5.01, or a higher version must be installed).
(example IPv4 address: 192.168.15.16)

http://192.168.15.16/printer

https://192.168.15.16/printer

You can enter “http: //printer’s address/ipp” as the printer’s address.

«
...
22
23
24
25
26
...
»

Summary of Contents for LP124w

























































































































































































































































































































































































Reviews:

No comments

Related manuals for LP124w

Brand: Oki Pages: 215

imageRUNNER ADVANCE C5255

Brand: Canon Pages: 64

Powershot A3100 IS

Brand: Canon Pages: 6

imagePROGRAF TC-20

Brand: Canon Pages: 44

Brand: Canon Pages: 88

Brand: SATO Pages: 2

Brand: Ricoh Pages: 156

Brand: Oki Pages: 276

Brand: Brightek Pages: 8

Brand: Lexmark Pages: 79

Brand: Oki Pages: 271

PcOS Series 80PLUS

Brand: Ithaca Pages: 131

Printpix NC-400D

Brand: FujiFilm Pages: 47

ApeosPort C5570

Brand: Fuji Xerox Pages: 290

Brand: Ocom Pages: 23

Brand: WAGO Pages: 52

Asterisk ST-EP4

Brand: Pioneer Pages: 11

Brand: Pioneer Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands