Ricoh LP124w, Software Manual

Page: 303 / 376

Using NetWare
289
7
N
Click [ Configuration ] , click [ Parallel ] in the [ Printer type ] list, and then click
[ Communication ] .
O
Click [ Manual load ] in the [ Communication type ] area, and then click [ OK ] .
Check the settings, and then click [ OK ] .
P
Set up the network connection to a print server. Select a context specified
using NIB Setup Tool, and then click
[ Create ] on the [ Object ] menu.
Q
In the [ Class of new object ] box, click [ Print Server ] , and then click [ OK ] . For
NetWare 5, click [ Print Sever (Non NDPS) ] .
R
In the [ Print Server Name ] box, enter the print server name.
Use the same print server name specified using NIB Setup Tool.
S
Select the [ Define additional properties ] check box, and then click [ Create ] .
T
Assign the printer to the created print server. Click [ Assignments ] , and then
click Add in the [ Assignments ] area.
U
In the [ Available objects ] box, click the queue you created, and then click [ OK ] .
V
In the [ Printers ] area, click the printer you assigned, and then click [ Printer ]
[ Number ] .
W
Enter the printer number, and then click [ OK ] . Check the settings, and then
click [ OK ] .
X
Start the print server by entering the following from the console of the Net-
Ware server.
If the print server is in operation, quit and restart it.
❖
To exit
CAREE: unload pserver
❖
To start
CAREE: load pserver "print_server_name"
Y
Enter the printer server name as the context name, and then press the
{
OK
}
key.
Z
Select the printer name on the context menu, and then press the
{
OK
}
key.