Ricoh LP124w, Software Manual

Page: 236 / 376

Monitoring and Configuring the Printer
222
6
dhcp
Use the “dhcp” command to configure DHCP settings.
❖
View settings
The following command displays the current DHCP settings.
msh> dhcp
❖
Configuration
You can configure DHCP.
msh> dhcp "interface_name" {on|off}
• Click {on} to enable DHCP. Click {off} to disable DHCP.
• If the DNS server address and domain name are obtained from DHCP, be
sure to click {on}.
• wlan can be specified only when the IEEE 802.11b interface unit is in-
stalled.
❖
Current interface priority configuration display
msh> dhcp priority
❖
Interface priority configuration
msh> dhcp priority "interface_name"
• You can select which interface has DHCP parameter priority.
• Priority settings are available when multiple interfaces are installed.
❖
DNS server address selection
msh> dhcp dnsaddr {dhcp | static}
• Specify whether to obtain the DNS server address from the DHCP server
or use the address set by a user.
• To obtain the DNS server address from the DHCP server, specify “dhcp”.
To use the address set by a user, specify “static”.
❖
Domain name selection
msh> dhcp domainname {dhcp | static}
• Specify whether to obtain the domain name from the DNS server or use the
domain name set by a user.
• To obtain the domain name from the DHCP server, specify “dhcp”. To use
the domain name set by a user, specify “static”.
Interface name Interface configured
ether Ethernet interface
wlan IEEE 802.11b interface