Ricoh LP124w, Software Manual

Page: 25 / 376

Using the SmartDeviceMonitor Port
11
1
M
Enter a name for identifying the printer in [ IPP Port Name ] . Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [ Printer URL ] box be-
comes the IPP port name.
N
Click [ Detailed Settings ] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O
Click [ OK ] .
P
Check that the port of the selected printer is displayed in [ Port: ] .
Q
Set a user code, if necessary.
Up to 8 numeric characters can be entered. No alphabetic characters or sym-
bols can be entered.
R
Select the [ Default Printer ] check box to configure the printer as default.
S
Click [ Continue ] .
Installation starts.
T
After the installation is completed, select one of the options to restart the
computer either now or later, and then click
[ Finish ] .
Restart the computer to complete installation.
Note
❒
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒
This allows a SmartDeviceMonitor for Admin user to display and check
the number of sheets each user prints. For details, see SmartDeviceMonitor
for Admin Help.
❒
To stop installation of the selected software, click [ Cancel ] before installa-
tion is complete.
❒
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use
[ Add Printer ] .
Reference
p.50 “Having Problems Installing the Printer Driver from the CD-ROM”