Ricoh LP124w, Software Manual

Page: 57 / 376

Using as the NetWare Print Server/Remote Printer
43
1
I
Click [ Port: ] , and then click [ Add ] .
J
Click [ Network Printer ] , and then click [ OK ] .
K
Double-click the name of the NetWare file server on the network tree.
The created queue is displayed.
L
Select the print queue, and then click [ OK ] .
M
Check that the port of the selected printer is displayed in [ Port: ] .
N
Click [ Continue ] .
The printer driver installation starts.
O
Click [ Finish ] in the [ Select Program ] dialog box.
P
After the installation is completed, select one of the options to restart the
computer either now or later, and then click
[ Finish ] .
Restart the computer to complete installation.
Q
After restarting the computer, launch the [ Printers ] window, and then open
the printer properties.
Under Windows XP or Windows Server 2003/2003 R2, open the printer prop-
erties from the
[ Printers and Faxes ] window.
R
Click [ Finish ] in the [ Introduction complete ] dialog box.
S
In the [ Printers ] window, open the printer properties.
Under Windows XP or Windows Server 2003/2003 R2, open the printer prop-
erties from the
[ Printers and Faxes ] window.
T
On the [ Printer Settings ] tab, clear the [ Form Feed ] and [ Enable Banner ] check
boxes.
Under Windows 2000/XP, Windows Server 2003/2003 R2, or Windows NT
4.0, click the
[ NetWare setting ] tab.
Do not select these check boxes since they are automatically selected by the
printer driver. If you select the check boxes, the printer may not print correctly.
U
Click [ OK ] to close the printer properties dialog box.
Note
❒
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒
To stop installation of the selected software, click
[ Cancel ]
before installa-
tion is complete.
❒
The protocol is set to inactive as default. Enable it using Web Image Mon-
itor or telnet.