manualshive.com logo in svg

Ricoh LP124w, Software Manual

Share
Download
Ricoh LP124w Software Manual Download Page 48

Preparing for Printing

34

1

Installing the PostScript 3 Printer Driver (Windows 2000)

Important

❒

Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.

❒

In an IPv6 environment, you cannot use the LPR Port. Use the SmartDevice-
Monitor port.

A

Quit all applications currently running.

B

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

C

Select an interface language, and then click 

[

OK

]

.

The default interface language is English.

D

Click 

[

PostScript 3 Printer Driver

]

.

Add Printer Wizard starts.

E

Click 

[

Next >

]

.

F

Click 

[

Local printer

]

, and then click 

[

Next >

]

.

G

Click 

[

Create a new port:

]

.

H

Click 

[

LPR Port

]

, and then click 

[

Next >

]

.

I

Enter the printer's IPv4 address in the 

[

Port Name

]

 box, and then click 

[

OK

]

.

J

Check that the name of the printer whose driver you want to install is se-
lected, and then click 

[

Next >

]

.

K

Change the printer name if you want, and then click 

[

Next >

]

.

Select the 

[

Yes

]

 check box to configure the printer as default.

L

Specify whether or not to share the printer, and then click 

[

Next >

]

.

M

Specify whether or not to print a test page, and then click 

[

Next >

]

.

N

Click 

[

Finish

]

.

The printer driver installation starts.

Note

❒

Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.

❒

printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.

❒

A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.

Summary of Contents for LP124w

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands