Pfeifer 114171, Translation Of The Original Operating Manual

Page: 27 / 266

13
English
PFEIFER Drum Handling Devices 06/2010 V 1.0 / Subject to technical changes!
EN
8.8 Drum rim grab
Part no.
PFEIFER 114171
Kraft –
Gaerner
500464
For
• Inherently stable metal drums with bead, in lying or
standing position
Use
1. Release lock, if applied,
raise by hand, place clamp
on drum rim and lock into
position by pulling upper
clamp arm slightly.
2. To undo, remove load
from drum rim clamp,
raise lock and remove
clamp.
8.9 Drum lifting clamp
Part no.
PFEIFER 121921 | 121923
Kraft 125814
Gaerner
500524
For
• Standing, inherently stable metal drums with bead,
with or without lid
Use
1. Preset to drum diameter
using adjusting screw.
Undo lifting clamp by
turning securing lever
anti-clockwise and place
onto drum.
2. After carefully placing
the lifting clamp on the rim
lower edge (drum rim),
tighten ring by turning the securing lever clockwise. Pay
attention that the drum lifting clamp sits tight against
drum all round.
3. Remove the drum lifting clamp by reverse procedure.