Pfeifer 114171, Translation Of The Original Operating Manual

Page: 23 / 266

9
English
PFEIFER Drum Handling Devices 06/2010 V 1.0 / Subject to technical changes!
EN
Use
1. Check lashing belt for
damage and ratchet for
proper operation before
every use.
2. Hook crane hook into
hanging eye or guide in
and secure fork-lift blades.
3. Position metal strap
horizontally with hand-
wheel to pick up drum.
4. Release ratchet, loosen
belt (need not be com-
pletely separated), and
unhook loose end with
hook from metal strap.
5. Move grab over centre
of drum, lower, wrap loose
end of lashing belt around
centre of drum and hook in
hook again.
6. Tension lashing belt with
ratchet (at least 1.5 windings of belt material on ratchet
pin).
7. Slowly lift load while ensuring firm seating of lashing
belt and retension if necessary. To turn or tilt drum,
adjust desired position with handwheel of slewing gear.
8. To loosen grab, pull ratchet lever completely toward
rear while simultaneously pulling lock and release belt.
8.2 Drum tilting grab
Part no.
PFEIFER 175520
Kraft –
Gaerner –
For
• metal drums with rolling hoops/channels (including
without lid) in vertical axial position
• Drum surface must be clean and grease-free
Wrap around lashing belt and
tension
Turn drum