Pacific Power Source AFX Series, Operation Manual

Page: 328 / 485

AFX SERIES® OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 328 of 485
Command Syntax [SOURce:]PULSe:WAVEFORM# <nr1 >
Description This command sets the selected waveform using the wavefrom
number.
Parameters Waveform number
Parameter Format <nr1>, <cr>
Example PULS:WAVEFORM 1
Query Format [SOURce:]PULSe:WAVEFORM#?
Returned Data Format <nr1>
Query Example PULS:WAVEFORM#?
1.0000
Query Syntax
[SOURce:]PULSe:WAVEFORM#:MINimum?
Description This command returns the minimum permissible set value for the
PULSE waveform.
Returned Data Format <nr1>
Query Example PULS:WAVEFORM#:MIN?
1
Query Syntax
[SOURce:]PULSe:WAVEFORM#:MAXimum?
Description This command returns the maximum permissible set value for the
PULSE waveform.
Returned Data Format <nr1>
Query Example PULS:WAVEFORM#:MAX?
200
Query Syntax
[SOURce:]PULSe:WAVEFORM:DEFault?
Description This command returns the default set value for the PULSE waveform.
Returned Data Format <nr1>
Query Example PULS:WAVEFORM:DEF?
1
Command Syntax [SOURce:]PULSe:PHASe# < nr2 >, <cr>
Description This command sets the initial PULSE phase angle for selected phase #
number. Only phase 2 (B) and 3 (C) are allowed.
Parameters Phase No., < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
Parameter Format <nr1>, <cr>
Example PULS:PHAS1 245.0
Query Format
[SOURce:]PULSe:PHASe#?
Returned Data Format <nr1>, <cr>
Query Example PULS:PHAS1?
245.0000