Pacific Power Source AFX Series, Operation Manual

Page: 314 / 485

AFX SERIES® OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 314 of 485
Query Syntax [SOURce:]STEP:FREQuency:FINal:MINimum?
Description This command returns the minimum permissible set value for the
final STEP frequency.
Returned Data Format <nr2>
Query Example STEP:FREQ:FIN:MIN?
15.0000
Query Syntax [SOURce:]STEP:FREQuency:FINal:MAXimum?
Description This command returns the maximum permissible set value for the
final STEP frequency.
Returned Data Format <nr2>
Query Example STEP:FREQ:FIN:MAX?
1200.0000
Query Syntax [SOURce:]STEP:FREQuency:FINal:DEFault?
Description This command returns the default set value for the final STEP
frequency.
Returned Data Format <nr2>
Query Example STEP:FREQ:FIN:DEF?
60.0000
Command Syntax [SOURce:]STEP:FREQuency:DELTa <nr2 >, <cr>
Description This command sets the delta frequency.
Parameters Frequency, < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
Parameter Format <nr2>, <cr>
Example STEP:FREQ:DELT 5.0, SAT
Query Format [SOURce:]STEP:FREQuency:DELTa?
Returned Data Format <nr2>
Query Example STEP:FREQ:DELT?
5.0000
Query Syntax [SOURce:]STEP:FREQuency:DELTa:MINimum?
Description This command returns the minimum permissible set value for the
delta STEP frequency.
Returned Data Format <nr2>
Query Example STEP:FREQ:DELT:MIN?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings