Pacific Power Source AFX Series, Operation Manual

Page: 386 / 485

AFX SERIES® OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 386 of 485
Command Syntax *ESE<nr1>
Description Selects the desired bits from the standard event status enable
register. The variable <nr1> represents the sum of the bits that will
be enabled.
This register monitors I/O errors and synchronization conditions such
as operation complete, request control, query error, device
dependent error, status execution error, command error and power
on. The selected bits are OR’d to become a summary bit (bit 5) in the
byte register which can be queried. The setting by this command is
not affected by *RST. However, cycling the power will reset this
register to zero. Refer to section 8.12 for register bit values.
Parameters Range 0-255
Parameter Format <nr1>
Example *ESE 128
Query Format *ESE?
Returned Data Format <nr1>
Query Example *ESE?
193
Query Format *ESR?
Description Event Status Register Query. Reads the contents of the Status Event
Register (ESR). After this query, the content of the ESR register is
reset. Refer to section 8.12 for register bit values.
Returned Data Format <nr1>
Query Example *ESR?
0
Command Syntax *GTL
Description Goto Local. Releases lock of front panel controls.
Returned Data Format N/A
Query Example N/A
Query Format *IDN?
Description Identification Query. Returns the unit’s Identity string. The IDN string
response contains several fields separated by a comma.
Query response : Manufacturer, model, serial number, firmware
revision.
Returned Data Format <cr>,<cr>,<nr1>,<nr2>
Query Example *IDN?
PPSC,3150AFX-2AG,106378889,2.0.0
Command Syntax *LLO
Description Local Lock out. Locks out front panel LOCAL function.
Parameters None
Parameter Format n/a