Pacific Power Source AFX Series, Operation Manual

Page: 304 / 485

AFX SERIES® OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 304 of 485
Query Syntax [SOURce:]STEP:RAMP:DEFault?
Description This command returns default set value for the STEP ramp time
setting.
Returned Data Format <nr2>
Query Example STEP:RAMP:DEF?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
Command Syntax [SOURce:]STEP:LENGth <time>, <opt>
Description This command sets the ramp time of the step in seconds
Minimum time set value allowed is 0.0002 sec. (0.2 msec)
Parameters Time in seconds, Option: < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
Parameter Format <nr2>, <cr>
Example STEP:MODE:LENG 5, SAT
Query Format [SOURce:]STEP:LENGth?
Returned Data Format <nr2>
Query Example STEP:LENG?
5.0000, SAT
Query Syntax
[SOURce:]STEP:LENGth:MINimum?
Description This command returns lowest permissible set value for the STEP
length time setting.
Returned Data Format <nr2>
Query Example STEP:LENG:MIN?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
Query Syntax [SOURce:]STEP:LENGth:MAXimum?
Description This command returns highest permissible set value for the STEP
length time setting.
Returned Data Format <nr2>
Query Example STEP:LENG:MAX?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
Query Syntax [SOURce:]STEP: LENGth:DEFault?
Description This command returns default set value for the STEP length time
setting.
Returned Data Format <nr2>
Query Example STEP:LENG:DEF?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings