Pacific Power Source AFX Series, Operation Manual

Page: 472 / 485

AFX SERIES® OPERATION MANUAL
SECTION 13:
Service and Maintenance
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 472 of 485
Error Source Code Category Error Message Possible Cause Resolution
Front panel
Fault
349 Error Analog inputs cannot be
read.
Configuration Error. No
data received from
analog inputs
Check connections to
AUX I/O connector and
pin assignments
Front panel 350 Error Transformer hardware
detected.
Unit model mismatch.
Front panel 351 Error Ambient temperature
exceeded maximum limit.
Front panel 352 Error Mismatch between
models of units in
parallel.
Front panel 353 Error Unit model mismatch.
Front panel 354 Internal
Error
Digital inputs cannot be
read.
Front panel 355 Internal
Error
Did not receive MDO 1 -
Inverter A.
An inconsistency was
detected in the power
source's internal
communication network.
Turn unit off, check
parallel cable connections
if present and then turn
unit back on. If problem
recurs, contact customer
service.
Front panel 356 Internal
Error
Did not receive MDO 2 -
Controller A.
An inconsistency was
detected in the power
source's internal
communication network.
Turn unit off, check
parallel cable connections
if present and then turn
unit back on. If problem
recurs, contact customer
service.
Front panel 357 Internal
Error
Did not receive MDO 3 -
Controller A.
An inconsistency was
detected in the power
source's internal
communication network.
Turn unit off, check
parallel cable connections
if present and then turn
unit back on. If problem
recurs, contact customer
service.
Front panel 358 Internal
Error
Did not receive MDO 4 -
Controller A.
An inconsistency was
detected in the power
source's internal
communication network.
Turn unit off, check
parallel cable connections
if present and then turn
unit back on. If problem
recurs, contact customer
service.
Front panel 359 Internal
Error
Did not receive MDO 5 -
Controller A.
An inconsistency was
detected in the power
source's internal
communication network.
Turn unit off, check
parallel cable connections
if present and then turn
unit back on. If problem
recurs, contact customer
service.
Front panel 360 Internal
Error
Did not receive MDO 6 -
Controller A.
An inconsistency was
detected in the power
source's internal
communication network.
Turn unit off, check
parallel cable connections
if present and then turn
unit back on. If problem
recurs, contact customer
service.
Front panel 361 Internal
Error
Did not receive MDO 7 -
Controller A.
An inconsistency was
detected in the power
source's internal
communication network.
Turn unit off, check
parallel cable connections
if present and then turn
unit back on. If problem
recurs, contact customer
service.
Front panel 362 Internal
Error
Did not receive MDO 8 -
Controller A.
An inconsistency was
detected in the power
Turn unit off, check
parallel cable connections