Pacific Power Source AFX Series, Operation Manual

Page: 332 / 485

AFX SERIES® OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 332 of 485
8.7.13 IEC413 Option Interharmonics Commands
The following SCPI commands apply only to AFX models with the -413 Option installed. The
presence of this option can be checked using the *IDN? Query to check for the letter “C” in the AXF
Model number. Examples: 3150AFX-4AG
C ”. See section 4.16 on page 48 for more details.
Command Syntax [SOURce:]INTHarmonic:FREQuency
Description Sets the frequency of the interharmonic voltage component for all
phases. The query format returns the active setting
Parameters Frequency
Parameter Format <nr2>
Example INTH:FREQ 470
Query Format [SOURce:]INTHarmonic:FREQuency?
Description Query format returns theinterharmonic frequency setting.
Returned Data Format <nr2>
Query Example INTH:FREQ?
470.0000
Command Syntax
[SOURce:]INTHarmonic:FREQuency:DEFault
Description Sets the default frequency of theinter harmonic voltage component
for all phases. The factory default setting is 1800 Hz.
Parameters Frequency
Parameter Format <nr2>
Example INTH:FREQ:DEF 90
Query Format
[SOURce:]INTHarmonic:FREQuency:DEFault?
Description Query format returns the interharmonic frequency setting.
Returned Data Format <nr2>
Query Example INTH:FREQ:DEF?
90.0000
Query Format [SOURce:]INTHarmonic:FREQuency:MAXimum?
Description Returns the maximum value for the interharmonic frequency setting
which is 10,000 Hz..
Returned Data Format <nr2>
Query Example INTH:FREQ:MAX?
10000.0000
Query Format [SOURce:]INTHarmonic:FREQuency:MINimum?
Description Returns the minimum value for the interharmonic frequency setting
which is 15 Hz..
Returned Data Format <nr2>
Query Example INTH:FREQ:MIN?
15.0000