Pacific Power Source AFX Series, Operation Manual

Page: 227 / 485

AFX SERIES® OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 227 of 485
Command Syntax MEASure:LOGger:FILELimit <nr1>
Description Sets the limit of samples to save in the file. If the limit is reached and
the logging process continues, a new file will be created.
Parameters Limit in number of samples.
Parameter Format <nr1>
Example MEAS:LOG:FILEL 100
Query Format MEASure:LOGger:FILELimit?
Returned Data Format <nr1>
Query Example MEAS:LOG:FILEL?
10000
Command Syntax MEASure:LOGger:FILEName <cr>
Description Sets the data logging file name
Parameters Filename between double quotes
Parameter Format <cr>
Example MEAS:LOG:FILEN “Measurement-AC+DC”
Query Format MEASure:LOGger:FILEName?
Returned Data Format <cr>
Query Example MEAS:LOG:FILEN?
Measurement-AC+DC
Command Syntax MEASure:LOGger:MEMory <cr>
Description Select the memory where the logging files will be saved. By default it
is RAM unless a memory stick or USB drive was inserted and selected
with this command:
MEAS:LOG:MEM:CAT? can be used to get the available memories.
Parameters Memory name between double quotes.
Parameter Format <cr>
Example MEAS:LOG:MEM “USBA”
Query Format MEASure:LOGger:MEMory?
Returned Data Format <cr>
Query Example MEAS:LOG:MEM?
USBA
Query Format MEASure:LOGger:MEMory:CATalog?
Description Returns the catalog of available memory names.
Returned Data Format <cr>
Query Example MEAS:LOG:MEM:CAT?
RAM, USBA