background image

GENERAL, WORK AREA & PERSONAL SAFETY

WARNING:

 Do not operate or place this device near flammable materials or any 

location, which accumulates flammable fumes.

WARNING:

 Working around lead-acid batteries may be dangerous. Lead-acid 

batteries generate explosive gases during normal charging and jump-starting 

operations.

WARNING:

 All lead-acid batteries (car, truck and boat) produce hydrogen gas, 

which may violently explode in the presence of fire or sparks. Do not smoke, use 

matches, lighters or open flame near batteries.

WARNING:

 Avoid dropping metal tools onto the vehicle battery. It might spark 

or short circuit the battery or other electrical part that may cause short circuits or 

explosion.

WARNING:

 If contact with battery acid occurs, rinse immediately and thoroughly 

with water, then wash with soap and water. Get immediate medical attention 

if redness, irritation or pain is present. For eye contact, flush eyes for at least 15 

minutes and get immediate medical attention.

WARNING:

 Stay clear of fan blades, belts, pulleys and moving parts that can cause 

bodily injury during battery jump-start.

WARNING:

 Remove personal metal items such as rings, bracelets, necklaces and 

watches while working with a lead-acid battery. It can produce a short-circuit high 

enough to cause a severe burn.

•  Make sure fresh water & soap are available nearby in case battery acid 

contacts skin, eyes or clothing. 

•  Do not submerge device in water, or expose it to heavy moisture or rain.
•  Always keep the booster clamps in their storage holders to prevent sparking 

when recharging and when they are not in use.

•  This device is not intended for use in the rain or temperatures above 104˚F.
•  This device has no consumer serviceable parts, except the inverter 

replaceable fuse. 

•  Do not attempt to remove or replace the battery used in this device. When the 

battery has reached the end of it’s useful lifetime, take the entire device to a 

battery recycling facility for proper disposal and /or battery replacement.

•  It is highly recommended that this device be operated by two persons. Ensure 

that someone is available to give assistance, if needed. 

•  Wear complete eye and clothing protection. Do not touch eyes while working 

near battery.

•  Do not operate this device while wearing vinyl clothing. Static electricity sparks 

may be generated when vinyl clothing is rubbed.

•  Do not face the battery. Stay as far as possible from the vehicle battery being 

jumped when making final connection.

•  This is not a toy. Keep out of reach of children!

NOTICE:

 Prior to use, read and understand all warnings, cautions and instructions 

included in this instruction manual, and those published by your vehicle battery 

manufacturer and manufacturer of any device intended to be used with this unit. 

Failure to follow all instructions and abide by all cautions and warnings could result 

in personal injury, injury to others and property damage. Retain this manual for 

future use. 

SPECIFICATIONS

Built-in battery

8-amp hour (Ah) sealed, lead-acid, maintenance- 

free, spill-proof, rechargeable

DC socket

12 Volt DC (15 Amp replaceable blade fuse)

USB port

5 Volt DC / 2.1A

LED light

12 Volt DC / 330 mA

Power inverter

140 Watt

Air compressor

150 PSI

Circuit breaker

Internal, Auto-reset (after 60 seconds)

Net weight

10.6 lbs.

Unit dimensions

9.14 in. ( h ) x 6.97 in. ( w ) x 12.2 in. ( d )

Storage  

temperature

(-4ºF - 140ºF) (-20ºC - 60ºC). Store in a cool, dry, 

well-ventilated area with overhead cover.

Operation  

temperature

(32ºF - 104ºF) (0ºC - 40ºC). Operate in a dry, well-venti-

lated area and place device on a leveled surface.

FEATURES

BOOSTER CABLES POWER SWITCH:

 Heavy-duty rotary switch turns power off to 

booster cables when not in use. Power can be turned on by turning the rotary 

switch in the clockwise direction.

POWER STATUS & CHARGE INDICATOR: 

 

Red LED = Battery charging  

Amber LED = Battery charged at mid-level  

Green LED = Battery is fully charged

HAND GENERATOR:

 Manually charges device battery in remote areas.

HAND GENERATOR CHARGE INDICATOR:

 LED indicator illuminates when battery  

is being charged (blinking).

CONVENIENT CHARGE CORDS:

 120 Volt AC charger for in home use & 12 Volt DC 

charger for on the road use.

12 VOLT DC POWER OUTLET WITH OVERLOAD PROTECTION: 

Provides power to 

most 12 Volt DC accessories equipped with a 12 Volt DC accessory plug. Device 

circuit is protect with an auto-reset overload circuit breaker and a replaceable  

15A fuse on front panel.

HEAVY-DUTY BOOSTER CLAMPS: 

200 AMP rated color-coded battery clamps.

PROFESSIONAL QUALITY CABLES: 

Color-coded cables with extra-thick, oil-resistant, 

external-cable insulation sheathing.

BOOSTER CLAMPS STORAGE HOLDERS:

 Prevents accidental sparking when cables 

are not in use.

REVERSE BATTERY POLARITY DETECTION CIRCUITRY: 

Circuitry automatically 

activates if accidental reverse polarity clamp connection occurs. Red LED illuminates 

accompanied by a high pitch alarm.

BUILT-IN POWERFUL 150 PSI COMPRESSOR:

•  Compressor power switch.
•  Accurate air-pressure dial gauge with large and easy to read pressure 

increments in  

 (PSI) and  

 units.

•  Heavy-duty, high-pressure inflator rubber air-hose with an universal air valve 

stem quick-connector nozzle.

•  Nozzle adaptors for inflatables.

STANDARD 5 VOLT USB PORT:

 Switch-activated standard USB port for personal 

devices.

140 WATT POWER INVERTER:

 Switch-activated power inverter provides portable 

power to 120 Volt AC devices.

LED LIGHT:

 Provides long-lasting portable lighting with emergency flasher function.

No. 7471

8-IN-1 PORTABLE POWER SOURCE  

with Unit Battery Hand Generator

DC 12V

SOCKET

Summary of Contents for 7471

Page 1: ...vehicle battery manufacturer and manufacturer of any device intended to be used with this unit Failure to follow all instructions and abide by all cautions and warnings could result in personal injury injury to others and property damage Retain this manual for future use SPECIFICATIONS Built in battery 8 amp hour Ah sealed lead acid maintenance free spill proof rechargeable DC socket 12 Volt DC 15...

Page 2: ...Turn the ignition key and attempt to start the vehicle NOTE If the vehicle does not start after 4 to 5 seconds of engine cranking stop and wait 3 to 4 minutes then try again Repeat several times until the vehicle starts If the vehicle starts turn the device booster switch counter clockwise to the Off position Disconnect clamps in reverse sequence to connecting procedure above as far away from the ...

Page 3: ...a and is to be used to charge the device is protected by a Ground Fault Interrupt switch CAUTION Do not overcharge this unit Overcharging may result in damage to the unit CAUTION Do not recharge device near flammable materials or any location which accumulate flammable fumes Do not smoke use matches lighters or open flame near the device when during recharging Recharge the device in a clear unobst...

Page 4: ...eck the connection of the 120 Volt AC appliance to the inverter 120 Volt power outlet Check for proper power inverter wattage range for given 120 Volt AC appliance Recharge the device to full charge Compressor does not start Weak or low device charge Recharge the device to full charge Compressor does not inflate Hose nozzle not properly connected onto the air valve stem Compressor air hose leakage...

Reviews: