![background image](http://html1.mh-extra.com/html/omron/cx-supervisor/cx-supervisor_user-manual_744211306.webp)
Appendix D CX-Server Error Codes
305
Appendix D
CX-Server Error Codes
When errors occur in the communication package, CX-Server, an error code
may be displayed in the CX-Supervisor Error Log. To explain the cause of this
error:
•
In the CX-Supervisor Error log, press the "Display Code Converter" button
to launch the Error converter and show further details. See Chapter 6
Projects, Events / Error messages for more details.
•
Launch the Error Code converter from the Start menu, under the CX-
Supervisor menu and type in the code displayed.
Alternatively, the full list of causes is below.
Note:
The cause is only the last 2 digits of the error code for example, if the error
shown is "0x8a1b" then ignore the "8a" and just look up "0xnn1b":
Code
Cause
0xnn00
Normal Operation.
0xnn01
Cancel Button was pressed.
0xnn02
Normal Operation.
0xnn03
The executing function was stopped in the applications callback
handler.
0xnn04
The return specified buffer is not large enough to hold all the
data requested.
0xnn05
The specified name is not unique within the open project file.
0xnn06
An unspecified error occurred in CX-Server that is not handled
by any other error code.
0xnn07
CX-Server has not been initialised by the application.
0xnn08
The specified address is invalid for the selected or open device.
This error may be generated by the Communications Manager
during address validation, or the device during a read / write
request.
0xnn09
The CDMPLCCommand function executed is not supported on
the selected or open device.
0xnn0A
The File or filename specified is invalid or could be opened /
created.
0xnn0B
The device's operating mode is invalid for the requested
operation, or the device was opened in an mode not compatible
with the requested operation e.g attempt to execute
CDMGetData when the device was open in Read Only mode.
0xnn0C
The specified name is invalid, it name contains invalid
characters.
0xnn0D
One or more of the specified parameters are invalid.
0xnn0E
The open PLC handle specified is invalid.
0xnn0F
The open Project handle specified is invalid.
0xnn10
The open User handle specified is invalid.
0xnn11
The Key specified is invalid or cannot be found.
Summary of Contents for CX-Supervisor
