Omron CVM1D, Operation Manual

Page: 451 / 468

447
Parameter Default value
L:Group 1,2 1st addr
(First words for SYSMAC BUS/2 Slaves) RM0 RM1 RM2 RM3
Group 1: CIO 0200 CIO 0400 CIO 0600 CIO 0800
Group 2: CIO 0250 CIO 0450 CIO 0650 CIO 0850
M:Trans I/O addr (First words for I/O
Terminals) RM0 RM1 RM2 RM3
CIO 2300 CIO2332 CIO 2364 CIO2396
RM4 RM5 RM6 RM7
CIO 2428 CIO 2460 CIO 2492 CIO 2524
N:Group 3, RT 1st addr
(First words for group-3 Slave Racks) Group 3 (SYSMAC BUS/2):
RM0
RM1 RM2 RM3
CIO 0300 CIO 0500 CIO 0700 CIO 0900
Words allocated to Units in order under each Master.
RT (SYSMAC BUS):
Defaults for SYSMAC BUS Slaves are the same as for I/O Terminals
(see above). Words allocated to Units in order under each Master.
O:CV–SIOU 1st addr Not used at present.
P:Power break (Momentary power interruption
time) 0 ms (Fixed)
Q:Cycle time Cycle variable
R:Watch cycle time (Cycle time monitoring
time) 1,000 ms
S:Error log 20 records in A100 through A199
T:IOIF, RT display (Slave display modes at
startup) Mode 1
PC Setup Default Settings
Section 7-3