manualshive.com logo in svg

Omron CVM1D, Operation Manual

Share
Download
Omron CVM1D Operation Manual Download Page 25

19

4. Close the cover.

Memory Card indicator

Memory Card
power switch

Memory Card
eject button

Memory Card

Cover

Removing a Memory Card

1, 2, 3...

1. Open the cover of the Memory Card compartment.

2. Press the Memory Card power switch once if the Memory Card indicator is

lit. The Memory Card indicator will turn OFF.

3. Press the Memory Card eject button. The Memory Card will be released al-

lowing it to be removed.

4. Pull out the Memory Card.

5. Close the cover.

Note

1. Do not expose the Memory Card to high temperature, humidity, or direct

sunlight.

2. Do not bend the Card or subject it to shock.

3. Do not apply excess force to the Card when inserting or removing it.

4. Do not remove the Card while the M/C ON indicator is lit; doing so may result

in data errors in the memory.

2-4-2 File Transfer between the CPU and Memory Card

Memory Card files are identified by both their filename and filename extension.
The following table lists the filenames and filename extensions that are used
with the PC. Filenames are eight characters long and recorded in ASCII. If fewer
than eight characters are needed, enter spaces (ASCII 20) in the remaining by-
tes.

Type of file

Filename

Extended PC Setup

1

filename.STD

Data files

filename.IOM

Ladder program files (files saved with the partial save
operation)

filename.LDP

Program file (complete program)

filename.OBJ

Extended PC Setup

1 

(transferred at start-up)

AUTOEXEC.STD

Program file (complete program transferred at start-up)

AUTOEXEC.OBJ

Note

1. Extended PC Setup includes the PC Setup, I/O table, routing tables, data

link tables for data links in SYSMAC LINK, SYSMAC NET Link, and Control-
ler Link Systems, Communications Unit settings, BASIC Unit memory
switches, and customized settings (function codes and data areas).

Memory Card Files

Memory Cards

Section 2-4

Summary of Contents for CVM1D





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands