NXP Semiconductors MC9S08LG16, Reference Manual

Page: 357 / 373

Chapter 19 Debug Module (DBG) (64K)
MC9S08LG32 MCU Series, Rev. 5
Freescale Semiconductor 357
19.3.2.6 Debug Comparator C Low Register (DBGCCL)
19.3.2.7 Debug FIFO High Register (DBGFH)
Module Base + 0x0005
7 6 5 4 3 2 1 0
R
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
W
POR
or non-
end-run
0 0 0 0 0 0 0 0
Reset
end-run
1
1
In the case of an end-trace to reset where DBGEN=1 and BEGIN=0, the bits in this register do not change after reset.
U U U U U U U U
Figure 19-7. Debug Comparator C Low Register (DBGCCL)
Table 19-8. DBGCCL Field Descriptions
Field Description
Bits 7–0 Comparator C Low Compare Bits — The Comparator C Low compare bits control whether Comparator C will
compare the address bus bits [7:0] to a logic 1 or logic 0.
0 Compare corresponding address bit to a logic 0
1 Compare corresponding address bit to a logic 1
Module Base + 0x0006
7 6 5 4 3 2 1 0
R Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8
W
POR
or non-
end-run
0 0 0 0 0 0 0 0
Reset
end-run
1
1
In the case of an end-trace to reset where DBGEN=1 and BEGIN=0, the bits in this register do not change after reset.
U U U U U U U U
= Unimplemented or Reserved
Figure 19-8. Debug FIFO High Register (DBGFH)
Table 19-9. DBGFH Field Descriptions
Field Description
Bits 15–8 FIFO High Data Bits — The FIFO High data bits provide access to bits [15:8] of data in the FIFO. This register
is not used in event only modes and will read a $00 for valid FIFO words.