Neoware t5730 - Thin Client, User Manual

Page: 253 / 506

Setup Menus
Block Transmission 231
Transmit Protocol
Factory default: ANSI
The setting of this option determines whether a partial page of data
is transmitted in ANSI or VT131 format when the
Send Partial Page
option is checked.
When
ANSI
is selected, Local Editing mode will function according
to ANSI (American National Standards Institute) rules.
When
VT131
is selected, Local Editing mode will function in the
same way as a VT131 terminal. Select this option when running
software written for the VT131.
End of Line Characters
Factory default: ^M (i.e. CR)
This text box is used to specify the characters that are to indicate the
end of a line in a data block.
To change the current definition, delete the definition displayed in
the text box and type in the new one, either as the control key char-
acter equivalent or the decimal value of the ASCII character.
For example, the default ASCII character CR can be entered by typ-
ing the characters ^ and M , representing the keys Ctrl + M which,
when pressed together would generate the CR code.
Decimal values are entered as three-digit numbers immediately pre-
ceded by an underscore character. Values with only two digits must
be preceded by a zero. For example, the decimal value of
CR is 13,
so this would be entered as _013 .
End of Block Characters
Factory default: None
This specifies the characters that are to indicate the end of a block of
data.
To change the current definition, delete the definition displayed in
the text box and type in the new one, either as the control key char-
acter equivalent or the decimal value of the ASCII character.