Neoware t5730 - Thin Client, User Manual

Page: 316 / 506

HP 700-92/96 Emulation
294 Programming Function Keys & Buttons
Default Definitions
While this screen is displayed the f-keys and equivalent buttons have
the functions shown by the buttons at the bottom of the TeemTalk
window, so pressing
F4 or the
Default Values
button will cause the
default key and button definitions to be asserted. The default defini-
tions will take effect when the User Key Definition screen is exited.
Key String
Treatment
Each f-key and button definition displayed in the User Key Defini-
tion screen consists of two lines. The first line begins with the f-key
number followed by space then a one-character attribute field. This
field will contain either an uppercase
L
,
T
or
N
. These characters
indicate the following:
L
The key string is executed locally.
T
The key string is transmitted to the host only.
N
The key string is treated as keyboard-entered data.
The default selection is
T
for all f-keys. To change this setting, use
the Tab or Shift + Tab keys to move the cursor over the field then
press F2 (
Next Choice
button) or F3 (
Previous Choice
button) to
cycle through the options until the one required is displayed.
Function Indicator
The remainder of the first line is used to specify what is displayed on
the screen button to indicate its function. The default display shows
the numbers of the f-keys.
The two fields following
LABEL
represent the upper and lower lines
that can be displayed on the button. To change the current definition,
use the
Tab or Shift + Tab keys to move the cursor into the relevant
field and type in the new definition which can consist of a maximum
of 16 characters, eight characters per field.
Key String
Definition
The second line of each f-key definition contains the character string
that is to be displayed, executed, and/or transmitted to the host when
the key or button is pressed. The string may contain alphanumeric
characters, control characters, and explicit escape sequence charac-
ters entered when Display Functions mode is enabled by pressing
F7
or the
Display Functns
button.