Neoware t5730 - Thin Client, User Manual

Page: 389 / 506

Unisys T27 Emulation
The Status Bar 367
The Status Bar
The leftmost section of the status bar at the bottom of the TeemTalk
window will display additional symbols indicating the current state
of the Unisys T27 emulation.
LTIA On : The host connection is active, but the
Unisys T27 emulation does not have an
active address.
Off : No line activity; or the Unisys T27
emulation transmitted a character to the
host,
or the user pressed LOCAL .
Blink : The host connection is active and the
Unisys T27 emulation has an active
address.
ENQUIRY On : The host is unable to send a message to
the keyboard environment, press
RCV
to enable the keyboard environment to
receive data.
Off : The DCP (data comm pointer) page
went into receive mode;
or the user
pressed LOCAL .
LOCAL On : The user pressed LOCAL ; or the user
pressed a key when the cursor and the
DCP (data comm pointer) were on the
same page.
Off : The Unisys T27 emulation is switched
to transmit or receive mode.
RCV On : The keyboard environment is in receive
mode (ready to receive data) or is
receiving data from the host;
or