Neoware t5730 - Thin Client, User Manual

Page: 304 / 506

HP 700-92/96 Emulation
282 Function Keys & Buttons
Mode Selection
The
Mode Selection
functions are assigned to the buttons and func-
tio keys when you first run the HP 700-92/96 emulation. If the func-
tions are changed while using the emulation, you can reassert them
by pressing the
F9 key (equivalent to the User System key), then
F4 .
Line Modify - F1
This function enables you to edit and retransmit an incorrectly
entered command string when the emulation is in Remote mode and
Character mode and you are communicating interactively with the
host. This saves you having to retype the entire string again.
Note: This will not function when the emulation is in Block or
Format mode.
When the host causes an error message to be displayed indicating
that the string has been incorrectly entered, press the
F1 key or click
the equivalent button. An asterisk will appear on the button indicat-
ing that the function is selected. Move the cursor to the line contain-
ing the error, edit the line then press
Return or Enter . This will
cause the edited string to be transmitted and Line Modify mode to be
exited.
If after activating Line Modify mode you wish to cancel it, just press
F1 or click the button again.
Modify All - F2
This is similar to the Line Modify F1 function described previously,
the only difference being that the editing mode is not exited when
Return or Enter is pressed. F2 and its equivalent button acts as a
toggle key, switching the mode on or off. The setting may be saved
by selecting
Save Session
in the
File
menu.
The F2 Modify All key and button enables you to edit and retransmit
an incorrectly entered command string when the emulation is in