Neoware t5730 - Thin Client, User Manual

Page: 318 / 506

HP 700-92/96 Emulation
296 Character Display Attributes
1
Display the User Key Definition screen by pressing the keys
Shift + F10 together.
2
Press the Tab or Shift + Tab keys to position the cursor in the
first field next to the number of the f-key to be defined.
3
Press F2 until the letter L for L ocal is displayed.
4
Press Tab and type in the text that will appear in the display
label for the key, for example, Under in the first field and Line
in the second for Under Line . Press Tab to move down to the
next line.
5
Press F7 to enable Display Functions mode
6 Press Ctrl + [ together or the Esc key, followed by the charac-
ters &d and the attribute character, which for underline is D .
The key definition should look like this if the F1 key was
defined to enable the underline attribute:
For any other attribute or combination of attributes, substitute
the last character in the second line (
D in the example above)
with the relevant character from the following table.
7 When you have finished, press F9 to exit from the User Key
Definition menu, then F10 to enable the User Keys and display
the defined attribute labels.
Half-Brightness
Underline
Inverse Video
Flashing
Invisible
End Attribute
I
@ A B C D E
F G H J
K L M N O S