Neoware t5730 - Thin Client, User Manual

Page: 415 / 506

File Transfer
Kermit Parameters 393
Timeout in secs
Factory default: 5
This specifies how long the remote Kermit should wait before tim-
ing out.
Padding count
Factory default: 0
This specifies the number of padding characters to be sent before the
packet.
Padding char
Factory default: CTRL-@ (i.e. NULL)
This specifies the character to use for padding.
End of line char
Factory default: CTRL-M (i.e. CR)
This specifies the character which terminates the packet.
Quote char
Factory default: #
This specifies the character used to indicate that the next character is
in the decimal range 0 - 31, 128 - 159, or is a delete character (127).
Packet size
Factory default: 80
This specifies the maximum byte size of a packet from the sequence
number byte and including the checksum characters.
Checksum Type
Factory default: 1-Byte
This specifies the type of checksum computation used.
1-Byte
and
2-Byte
selects the standard Kermit 1-byte and 2-byte checksum
computations, respectively.
3-Byte-CRC
selects a cyclic redundancy