Neoware t5730 - Thin Client, User Manual

Page: 54 / 506

TeemTalk Connection Wizard Settings
32 International Settings
Preferred Character Set
Factory default for DEC VT & AIXTerm: ISO Latin-1
Factory default for ANSI BBS, AT 386 & SCO Console: Ansi
This enables you to select the type of character sets used for display-
ing characters.
The
DEC-MCS
,
ISO Latin-1
and
ISO Latin-2
settings enable you to
specify the 8-bit character set that is used within VT320 mode when
the
Character Set Mode
option is set to
Multinational
. The DEC
MCS and both ISO Latin character sets consist of two tables of char-
acters. The first table, ASCII 7-bit, is common to all three sets and
provides standard alphabetic, numeric and symbolic characters, and
control codes. The second (8-bit) table differs between the three sets
and provides various special and multinational characters and addi-
tional control codes.
The
Ansi
setting will use the PC (ANSI) character set specified by
the
Ansi Code Page
option. The ANSI BBS emulation will use this
character set by default.
When you select a double byte character set such as Japanese, the
Preferred Font
list box enables you to select from a list of fonts if
available.
Preferred Font
Factory default: Courier New
This enables you to specify the font to use for displaying characters.
The available settings depend on the fonts installed.
Ansi Code Page
Factory default: 437
This option specifies the character set used for display when the
Pre-
ferred Character Set
option is set to
Ansi
. Note that selecting the
ANSI BBS emulation will automatically set the preferred font to
Ansi
.
The character set mappings (code pages) supported are
437
for nor-
mal usage (default) and
850
,
858
or
1250
for multinational usage.