Neoware t5730 - Thin Client User Manual Download

Page: 252 / 506

Setup Menus

230

Block Transmission

When checked, this option will enable a partial page to be sent to the
host. The format of the partial page is determined by the setting of
the

Transmit Protocol

option. When unchecked, the contents of the

scrolling region will be sent to the host when the

Enter

key is

pressed.

PF Key Effect

Factory default: None

This option determines how unshifted PF keys work in Local
Editing mode.

When set to

None

, the unshifted function of PF keys will be

disabled.

When set to

Breakthrough

, unshifted PF keys will function

immediately when pressed if they have been assigned functions by
application software.

When set to

As TX Prefix

, the function of unshifted PF keys will be

sent to the host before a block of data is transmitted.

When set to

As TX Suffix

, the function of unshifted PF keys will be

sent to the host after a block of data is transmitted.

Send Key Effect

Factory default: Immediate

The setting of this option determines the effect of pressing the

Enter

key when sending data to the host.

When

Immediate

is selected, data will be sent to the host immedi-

ately without waiting for permission to transmit.

When

Deferred

is selected, a code will be sent to the host notifying

it that data is ready for transmission. The keyboard will be locked
until the host requests that the data is transmitted.

Summary of Contents for t5730 - Thin Client



























































































































































































































































































































































































































































































































Search results

Summary of Contents for t5730 - Thin Client

Reviews:

Related manuals for t5730 - Thin Client

Brands by name

Popular brands

Neoware t5730 - Thin Client, User Manual

Search results

Summary of Contents for t5730 - Thin Client

Reviews:

Related manuals for t5730 - Thin Client

Brands by name

Popular brands