Neoware t5730 - Thin Client, User Manual

Page: 185 / 506

Setup Menus
Wyse Settings 163
Wyse Settings
This dialog is displayed by selecting
Wyse
in the
Settings
menu. It
consists of several tabs of setup options which are accessed by click-
ing on the tab titles along the top.
Note that some of the settings apply to the TVI 910+, TVI 920, TVI
925, ADDS A2 and HZ 1500 emulations in addition to the Wyse
emulations. Also, some settings may not apply to the particular
Wyse emulation currently running. Selecting a setting that is not
applicable to the current emulation will cause TeemTalk to use the
default setting for that emulation when the dialog is exited.
Note: The
Tab Stops
dialog displayed by clicking the
Set Tabs
button is described in the section “Tab Stops” on page 224.
The Display Tab
Lines
Factory default: 24
This option applies to the WY-50+ and WY-60 emulations and
specifies the number of data lines displayed on the screen below the
status line. Note that the other emulations only support 24 lines and a
label line.
24
24 data lines and a label line at the bottom.
25
25 data lines but no label line.
42
42 data lines and a label line at the bottom.
43
43 data lines but no label line.