Neoware t5730 - Thin Client User Manual Download

Page: 403 / 506

Wyse Emulations

Status Line Messages

381

LOCK

indicates that the keyboard is locked. This takes pre-

cedence over the

CAPS

and

NUM

messages.

NUM

indicates that Num Lock is on. Press the

Num Lock

key to toggle the mode on and off.

Field

: Indicates the number of the page that is currently dis-

played. No message is displayed when the current page is
0.

Field

indicates that Monitor mode is on. In this mode, received

codes are not actioned but displayed as symbolic represen-
tations.

Field

: Indicates the current operating mode.

FDX

indicates full-duplex mode.

HDX

indicates half-duplex mode.

LCL

indicates local mode.

BLK

indicates block mode.

HBLK

indicates half-duplex block mode.

HLD

indicates that display update has been suspended.

Pressing the

Hold

key will toggle display update on and

off.

Field

>AUX

indicates that the emulation is in auxiliary print or

transparent print mode.

<AUX

indicates that the emulation is in auxiliary receive

mode.

=AUX

indicates that the emulation is in auxiliary receive

mode and auxiliary print mode.

%AUX

indicates that a print screen operation is in

progress.

Standard Status
Line

Field

rrr-ccc

indicates the current row and column position of

the cursor.

Summary of Contents for t5730 - Thin Client



























































































































































































































































































































































































































































































































Search results

Summary of Contents for t5730 - Thin Client

Reviews:

Related manuals for t5730 - Thin Client

Brands by name

Popular brands

Neoware t5730 - Thin Client, User Manual

Search results

Summary of Contents for t5730 - Thin Client

Reviews:

Related manuals for t5730 - Thin Client

Brands by name

Popular brands